Covid 19 Virus banner

Need Help? We're here for you. Call 877-852-2314
or Text us 307-200-8985
Shopping Bag0 item(s) in cart/ Total: $0

EMP Nitro Front Bumper with Winch Mount for RZR XP 1000 and RZR 900

EMP Nitro Front Bumper with Winch Mount for RZR XP 1000 and RZR 900
EMP Nitro Front Bumper with Winch Mount for RZR XP 1000 and RZR 900
Part Number:EMP-13056-12375
Your Price:$379.00

Nitro Front Bumper for RZR XP 1000 and RZR 900

Engineered from 1/8 inch thick and 3/16 inch thick American Steel this Nitro Front Brush Guard is sure to keep your RZR protected while out and about. This bumper mounts behind the radiator, unlike factory bumpers to give it even more strength. This also comes with a winch mount that fits most winches up to 4000 lbs, this bumper also allows you to mount your winch up high out of the mud and water or behind the radiator. Top mounting accepts both Wide Spool winches ( 6-5/8 inches wide x 3 inches deep, bolt pattern) and Standard Spool winches (4-7/8 inches wide x 3 inches deep, bolt pattern). This bumper looks great added onto the RZR 1000 and will add loads of protection to the front end of your machine! Upgrade your Polaris RZR with these EMP Nitro Front Bumper today!

- Our EMP Nitro Front Brush Guard generally ships out within 1 business day!
- Fits: Polaris RZR S 1000 : 2016+ / RZR XP 1000 : 2014+ / RZR XP 4 1000 : 2014+ / RZR 900 : 2015+ / RZR 4 900 : 2015+ / RZR S 900 : 2016+
- Laser Cut and CNC Formed for a perfect fit
- Mounts behind the radiator
- Powder Coated Black
- Made in the USA!!
Manufacturer Part Number : EMP-13056-12375

3 Stars
Product fit
Will not fit RZR 2018 XP Turbo without more modifications than explained in advertisement. Major cutting of front facial and re-locating holes in mounting brackets. Once I began to cut I was in to deep to stop. The front facial would not looked the same without the bumper installed. Instructions state do not use U-bolts on turbo but without them the mounting would be weak. Take the time to drill new holes in the mount and use the U-bolts to give the bumper proper support. Tip for EMP is weld nuts would go along way to make this bumper better.
Did you find this helpful? 
Reviewed by:  from Springfield. on 4/19/2020
3/5
5 Stars
CA
Easy to install with a little help from wife. The trick is leave everything loose to final asembly then adjust and tighten everything up. Low profile for good air flow to radiator. Looks good and very strong. Installed a superwinch 3500A for a excellent combination. Going to order rear bumber for rzr 900 to complete set up.
Did you find this helpful? 
Reviewed by:  from Oroville. on 10/8/2018
5/5

Related Items

Recently Viewed Items