Q:I own a 2015 Pioneer 500 and would like to buy the ITP black steel rims. I would like the offset to be identical to the stock steel rim. What is the ITP part number, offset and lug size for my UTV? Thanks for your help. Fred (05/15/17 @ 7:22am)
Asked by: Fred
- 5/15/2017
A: If you want the exact offset you will have to buy your rims from Honda. These are really close. They will stick out just a bit wider. Less than 1 inch.
Was this answer helpful?
5 of 6 Customer(s) found this Answer helpful.
Q:Have a 2019 Can-Am HD5. Want to order the Tusk Terrabytes 27x9R12 (front) and 27x11R12 (rear) and have you folks mount them on the ITP 12” Black Delta Steel ATV rims per your web site tire and wheel deal. Presume these rims will work on the Can-Am HD5 as it is a UTV, are dust cover caps included for this application as well?
Asked by: Foolishhand
- 5/26/2019
A: Yes these fit your machine, yes we can mount them with the Terrabite tires. No they don't make center caps for these rims to fit your application. Let me know if you have any other q's or need help placing the order.
Was this answer helpful?
2 of 2 Customer(s) found this Answer helpful.
Q:I have a John Deere 825i Gator ..... looking to replace JD stock "yellow" steel wheels.
Are these wheels available in a 12x8 rim size, to match my current rear John Deere rims ?
Appreciate hearing from you, Pete
Asked by: Pete
- 10/15/2015
A: Unfortunately no, these are only offered in a 12x7 but they will still work on your Gator just fine.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I bought these wheels for an 09 ranger 700xp. problem is the wheel bearings in the hubs are open to debris. do they sell dust covers for them?
Asked by: mark
- 1/26/2016
A: ITP doesn't make center caps for these rims that will fit Polaris. They only offer center caps for these to fit the 4/110 (honda, yamaha, suzuki) bolt pattern which is much smaller so they wouldn't fit your rims.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:i have a cub cadet volunteer with a tire size of 25x10x12. i need new rim due to rust. it has 5 lugs and they are spaced 2 3/4 center to center. i don't know how to figure a rim help thanks ??
Asked by: steve
- 3/17/2016
A: I'm sure you need the 5/4.5 bolt pattern that this rim is offered in. Give me a call and I can help you figure that out. 877-852-2314 ask for Spence.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:Will these fit a 2001 Yamaha Banshee 350 hub and a CARLISLE ACT 23X7RX12 tire? I would assume so since the bolt pattern and tire width is the same but I'd like another perspective before purchasing.
Asked by: Steve
- 10/17/2016
A: Yes these will fit on your Banshee as long you you select the correct bolt pattern. Your front wheels are 4/156. Yes these will also fit your 23x7x12 tires
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I want to purchase two full sets of these turf tires for my sportsman 500 HO's 06 and 04 models. I would rather not purchase 8 new rims if it can be avoided. Do you have turf tires that will fit both the OEM front AND rear rims so I can order them?
Asked by: Dan
- 10/20/2016
A: Hi, Yes we carry tires that will fit your factory rims. We just need to know the exact tire sizes that you currently have. Let us know and we'll be glad to help. Or give us a call. 877-852-2314
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a 1999 prairie 400 4x4 and need new rims and tires. i was looking into the Part Number:ITPDELBLK12-D12F515 but im not sure if they will fit front tires 25x8x12 and rear tires 25x11x10 could you let me know if these rims will fit?
Asked by: doreen
- 10/25/2016
A: Hi, Yes these rims would work with 25x8-12 tires but they will NOT work with 25x11-10 tires. You would need to buy new tires for the rear. In a 25x10-12 or any other size that fits 12 inch rims. Let us know if you have any other questions or give us a call and we'll help you put this order together.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I recently bought tires that are a little bigger than my stock ones and i need to find wheels that fit the new tires and fit my atv. I have a 2000 polaris xplorer 400 and the new tires are 25x10-12.?
Asked by: Rich
- 11/7/2016
A: Yes these wheels will fit your machine and do what you are needing. Just make sure you select the 4/4 2+5
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a 2016 Honda Pioneer 1000EPS, What is the correct part# for the rim that fits the front? The tires are 27x9.00 - 12.
Asked by: Ron King
- 8/4/2017
A: These only come in one size and offset for the pioneer. It's a 4/137 12mm 12x7 4+3. Just select Honda Pioneer 1000 from our application pull down and we'll send you the rim you need for that machine.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I obtained a set of new Maxxis 25x10x12 tires. Unfortunately they are on new 5+2 wheels and I need 2+5 for my Rancher. What I am trying to confirm is that these tires fit 12x7 wheels?
Thank you
Asked by: Werner
- 9/1/2017
A: Yes your 25x10-12 tires will fit 12x7 rims just fine.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a couple toro Workman HDX 20-9-12 5/4.5 bolt pattern. front wheels. I saw that you posted that this will work for the JD gator. My gator wheels will not fit on the toro. the inside of the rim will need 11 inches of clearance for the brake caliper. do you know if they will work? I will also consider going to a larger rim, but the tire cant go much bigger in diameter. Thanks in advance
Asked by: heath
- 12/4/2017
A: No I don't think these would fit if you have tried stock Gator wheels and they didn't work. I could supply you with 14 inch rims so you wouldn't have that issue but I wouldn't have any 20" tall tires to fit those 14 inch rims.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have kawasaki lakota with 10 rim 4x156 bolt pattern will that black 12 in rim fit my bike and can u give me idea of any other 12 inch rim from manafactur say like polaris or any other I could try find will going from 10 in to 12 in bring my bike up 2 in , thank u so much in advance for any help u can give me?
Asked by: Rock
- 1/6/2018
A: Yes this rim will fit your machine. We may have other options as well. Give me a call if you want to discuss and get some ordered. 877-852-2314 ask for Spence.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a 2007 Yamaha Rhino 660. My existing rim sizes are 12x6.0 (front) and 12x7.5 (rear) with 25x8x12 tires (Front) and 25x10x12 tires (rear). I do not see these exact rim sizes in your inventory. Which rim(s) should I purchase?
Asked by: Tom
- 2/12/2018
A: Our aftermarket rims are all 4 the same size. They don't make them in 2 different widths like your factory wheels. You would use these 12x7 rims with your 25x8 and 25x10 tires.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q: I have a 2015 rzr 900 s, I see this wheel says only up to 2014? Do you sell a similiar wheel for a 2015?
Asked by: Todd
- 12/16/2018
A: These wheels will not fit the newer Polaris models with 12mm studs. The holes in these rims are drilled out for the 3/8 studs that the older Polaris models use. We don't carry any steel wheels to fit your model. Any of our Alloy wheels would work though.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:will this rim fit on my 2017 Polaris 900 XP if I drill the bolt holes bigger?
Asked by: Don
- 11/21/2019
A: We've had a few customers do that over the years, we have asked ITP the same question and they say that we can't recommend it because it can weaken the integrity of the rims.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
A: These are 7 inches wide. The 8 and 10 inch widths you are referring to are most likely the width of your tires. Those tire sizes fit these rims that are 12x7. Let me know if you have any other q's.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:What is the bolt holes demention center to center?
Asked by: Tim
- 3/28/2020
A: This rim is offered in several bolt patterns so the measurement you are looking for will vary depending on which bolt pattern you order. What are you looking for? What machine are you putting them on?
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I'm looking for rims for my 2004 polaris trail boss 330?
Asked by: Kirstyn
- 7/22/2020
A: According to our guide, your trail boss uses a 4/156 bolt pattern on the front with a 4/4 bolt pattern on the rear. These rims are offered in the correct patterns for your machine. Let me know if you need help measuring that to double check the fitment.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a 2011 Precision Discovery Crew Cab UTV. The manufacturer is out of business and I can’t find much info on the machine. The bold pattern appears to be 4 on 4.5”. Can you please quote a set of steel wheels that will fit my machine?
Asked by: Brady
- 7/23/2020
A: Hi, I'm sorry we don't have any steel rims in a 4/4.5 bolt pattern. Can you please explain how you are measuring that, maybe we have something in a metric pattern that would fit.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
A: No, the holes in these rims are not drilled out large enough for the 12mm studs that your RZR has. These will not fit. The 14 inch Delta Steel wheels are prepped with the large hole so those would work.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a 2004 honda foreman ES. My rear wheelssays 12x75 and I have 26x12x12 tires. Can I put these tires on a 12x7 wheel?? What do you recommend?
Asked by: JB
- 8/10/2020
A: Hi, yes you can mount a 26x12-12 tire on a 12x7 rim but the tires will bulge out on the sidewalls. It's a pretty common fitment that many of our customers have done over the years. A 12x8 rim would be a better fit for that wide of a tire but the 12x7 will work.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I'm looking for a cheap spare for a 2017 Kawasaki Mule Pro FXT EPS, will this wheel fit a 26x11x12 or a 26x9x12 wheel?
Asked by: Ray
- 10/20/2020
A: Unfortunately no these won't fit. Your machine uses 12mm studs and these aren't drilled out big enough to accommodate 12mm studs. If you go to the 14 inch steel rims they would fit your machine. Let me know if you have any other q's.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:will this fit a ITP Mud Lite 25x8-12 and a 30x12-12?
Asked by: dylan
- 10/21/2020
A: Yes to both. These are 12x7. A 12x8 would be better for the 30x12-12 but they would still fit on this 12x7, they'll just be bulged out a bit more on the sidewall.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I bought 27x09x12 tires for the front and 27x11xx12 tires for the back of my Honda 700 pioneer. Will they fit on the stock rims which currently have 25x8x12 tires on the front and 25x10x12 tires on the back?
Asked by: Ross
- 11/21/2020
A: Yes
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
A: Hi, yes these will fit your model. Just click on your model from the drop down menu where it asks you to choose your machine. We'll send you the correct bolt pattern and offsets you need for that. Let us know if you have any other q's.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a kawAsaki Bayou the front rims have been replaced with 12 inch rims looking for a recommendation for 12 inch 4/137 rims for the rear?
Cheers,
Scott
Asked by: Scott
- 1/28/2021
A: Hi, yes these rims would fit your model, these are the only rims we carry that come in the 4/137 bolt pattern with the correct offset for your machine. Let me know if you have any other q's.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:What rim will fit a Kubota Rtv 1100c with 25x10x12 tires?
Asked by: Bigz2004
- 3/1/2021
A: Yes these will fit your Kubota. Does your model have the 5 lug or 4 lug pattern on it? Either way these rims are available to fit both pattern options.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I am looking for 4/110 12" 2+5 wheels. I am looking at the ITP steel wheel. Curious why there is a drop-down to identify what machine the wheels will go on. I have a Japanese Kei truck (2005 Mitsubishi Minicab), which obviously won't be an option on the drop-down. Why the drop-down?
Thanks -
Mike
Asked by: Mike Visket
- 3/31/2021
A: These are ATV rims. We need to know which ATV they are going on so we can be sure to send the correct bolt pattern and lug nuts. We don't advertise these for mini trucks so we don't have the mini trucks listed. If your mini truck happens to use the 4/110 2+5 fitment then they would work for your application. You would just select 4/110 2+5 from the first drop-down and don't make a selection on the machine. You'll need to let us know what size of lug nuts you need so we can send you the correct size.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:Wife has a 2001 Kawasaki Prairie 300, currently on has stock 10”rear wheel. Want to put on a bit larger tire will require a 12” wheel, will this fit her machine? It has the 4x137 bolt pattern.
Asked by: Sean Francke
- 4/6/2021
A: Yes these will fit her machine. Just select the 4/137 bolt pattern with 2+5 offset and it will work.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a 2019 polaris ranger 900 xp sxs.
I have a carlisle tire size 25x10x12. I am looking for a rim for this tire to serve as a spare.
Will these work together?
Asked by: timothy
- 5/9/2021
A: Yes that will work!
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a Polaris ranger 2020 XP 1000. Looking for a spare cheap steel rim. It’s a 12x9 rim with 4-156 pattern I believe. Can you help find one please?
Asked by: Jesse
- 5/17/2021
A: Hi, unfortunately these are the only steel rims we carry and they are 12x7. We don't have any rims in a 12x9.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a 2021 Yamaha Rmax 2 seater. I am looking at getting a spare tire for it. I need a 14X6.5 ET34 4/156 Lug Wheels steel rim. Can you tell me which one I need?
Asked by: Scott
- 5/25/2021
A: Hi, if you are looking for a rim with those exact specs you'll have to order it through Yamaha. Our aftermarket rims are 14x7 so they are not the exact same specs as the OEM rims on your machine.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:is the offset going to be same as my stock rims honda pioneer 1000/3 ?
Asked by: paul
- 8/19/2021
A: The offset will be very similar but it's not an exact OEM replacement. If you are just buying 1 rim I would recommend buying it from Honda so it's an exact match. If you are buying a pair of 2 or a set of 4 these would be a good option. Let me know if you have any other q's.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a 2014 Kawasaki Teryx Camo KRF800DEF which has stock 12x9 wheels on it. (Came from Kawasaki new with these wheels) One has been damaged beyond repair. Do you have one of this size?
Asked by: BAM
- 8/19/2021
A: Hi, in order to get an exact replacement you'll need to order it directly from a Kawasaki dealer. These are aftermarket rims so they will not have the exact same specs as your factory rims. These would work on your machine but you'd need to replace all 4.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:Is the 2+5 offset the same as 5+2 offset? I keep ordering rims and keep getting the wrong ones. Just looking for 2 delta black 12” rims with a bolt pattern of 4/137. Have no idea what I am doing.
Asked by: Steph
- 8/22/2021
A: No 2+5 is not the same as 5+2. The 2+5 is a deep dish offset, 2 inches behind your hub and 5 inches in front of your hub. 5+2 is the opposite, it has 5 inches behind your hub and 2 inches in front of your hub.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have several Questions
I have a Honda Pioneer 500 and will be Buying 27x9x12 inch tires for front and rear
I read here that they stick out about about an Inch farther than the Factory rims, Does
that mean that by using these rims instead of the Factory rims that there is less likelihood of a tire rubbing?
Does the Black or the chrome version of this wheel have the Most durable finish ?
When ordering for the Pioneer 500 do I need to order different rims for the front and back
or just order the same rims?
Asked by: Billy
- 11/2/2021
A: Yes these give you a little more clearance because they stick out farther from the vehicle compared to the factory rims which would make the tires less likely to rub. Both finishes are just painted on so it doesn't really matter. The black will obviously show scuffs/scratches more compared to the silver, but neither finish is more durable than the other. You don't need to order different rims, you just order the same rims all the way around for all 4.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
A: unfortunately we don't have any specs on the Bobcat machines. Do you know the bolt pattern? If not, you'll need to contact your dealer and find out what bolt pattern your model has. Also the stud size.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a 2010 Polaris Sportsman 800 EFI and want to replace read tires and rims. I selected the following ITPDELBLK12-6P0060 rims (quantity 2) and ITP Blackwater Evo (25x11r-12) Quantity 2) with the tires mounted on the rims as a package. My current rims (original equipment) have an offset - meaning the center part of the rim is not in the middle - it is 6 inches from one rim bead slot and 3 inches from the other side bead slot. Are these rims referenced above have an offset? Will the rim/time package described above fit my vehicle? If so - I'm ready to order today and want to receive the packages ASAP. Are they in stock? How quickly can I get them?
Asked by: Chris.Kelly
- 7/7/2022
A: Yes the Rims for your machine would be a 4/156 4+3. This package is in stock ready to ship. They would ship out today if you ordered within the next few hours. Thanks
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:Have a 2014 Suzuki kingquad with stock rims, 12/8/25 front tires 12/10/25 rear tires I am looking to replace the rims. I want to keep the same tire size front and back. What can I use to get this to track right without using spacers? I think from inside the rim the back is 4+3 and the fronts are 5+1. Thanks
Asked by: Steve
- 7/10/2022
A: Hi, what model of King Quad do you have? Does it have a solid rear axle or independent rear suspension?
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:Are these available with a 4/4 bolt pattern? I am doing a custom build and need some 12 inch wheels. Also, can I put 22x7-12 Front & 22x10-12 Rear tires on these, or do I need wider wheels for the rears? Thanks.
Asked by: Robert
- 12/16/2023
A: Yes these do come in a 12x7 4/4!! https://www.pureoffroad.com/4-bolt-itp-delta-steel-rims.htm
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:Will the ITP delta steel wheels fit my 2020 Kawasaki mule 4010 Trans 4x4 with the 4/137 bolt pattern? I keep reading that they won’t but have not found a reason why they won’t. Thanks
Asked by: Ryan
- 1/27/2024
A: Yes they should work on there just fine!!
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I have a 1996 Honda TRX300 2WD that has stock wheels and tires. I'm looking to replace the wheels with 12x7 ITP Rear Black Delta Wheels (4+3 offset for front, 2+5 offset for rear). Tires I was thinking Kenda K592 Bear Claws, 25x8x12 (front) and 25x10x12 (rear), for a all terrain tire. Do you have these in stock, or do you have any other recommendations?
Asked by: Kirk
- 4/25/2024
A: This specific combo isn't in stock at the same warehouse right now to pre-mount. Text us at 307-200-8985 or email us at [email protected] it will be easier to communicate there and we can help you find a kit!
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:Upsizing all tires of my 2019 Honda TRX420FM1. For the rear wheels, the new tires I want to use is 26x12-12 to be paired with this new rim ITP Delta Steel Black 12". The stock rear wheel offset is 2+5.
What is the offset of this new rim?
I tried to order this rim/tire combo but there was no option to set the offset or let your website know that its for the rear tires.
How do I get this info included in my order?
Thank you.
Asked by: Tom
- 8/4/2024
A: If you select a Honda ATV SRA (straight rear axle) we will send 4/110 5+2 for the front & 4/110 2+5 for the back automatically! Let me know if we can help with anything else!
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:Will this wheel work for my 2016 Teryx 4 front wheel? My tire size is 27x9R-12. Is the lug pattern correct also?
Asked by: Todd
- 12/27/2024
A: Yes it will, you just need to select the Kawasaki Teryx from the drop down menu when you add the item to your cart. That tells us what you're putting it on so we can be sure to send the correct bolt pattern for your machine.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:Hello, Since i choose my machine (2024 Honda Rancher 420 IRS), does that automatically make the rims the stock offset? I believe i need 5+2 offset on a 12x7 rim with 4x110mm lug pattern, i am mainly concerned about the offset, thank you
Asked by: Michael Myhre
- 3/13/2025
A: Yes, by choosing your machine we will automatically send you the closest to stock offset that we have in the rim you selected.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
A: The offset varies depending on the bolt pattern. What machine are you buying these for? Let me know and I can tell you what offset we have for that.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I'm looking for wheels and off-road tires for a Suzuki Carry mini truck. Simple steel wheels will do. Something in the range of 12" dia 10" wide rims, with good all terrain knobby tires. Bolt pattern / PCD is 4/100mm. Need a load index of at least 57 (around 500 pounds). I tried using your selector and picking a random machine but was unable to see the resulting PCD. Can you help? Thanks!
Asked by: mgm
- 9/2/2025
A: Hi, please reach out to us via phone and I can help you with some options for your mini truck. 877-852-2314 ask for Spence.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:I need a 4×156 rim with equal offset (example 4+4) . Do you have an available rim ?
Asked by: John
- 9/29/2025
A: Yes, we do have a couple of options but they are alloy wheels, we don't have any plain steel wheels with the specs you are requesting. Let us know if you are interested in an alloy wheel.
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.
Q:If I select Suzuki King quad (IRS) will the rims I receive be 12x7 4/110 and 5+2 Offset?
Asked by: Joe Lloyd
- 11/5/2025
A: We would send the 5+2 by default but we also carry these in the 4+3 offset if that's what you are looking for. If so, just reach out to us by phone or text and we can help you with the order to get you the 4+3
Was this answer helpful?
0 of 0 Customer(s) found this Answer helpful.