Super ATV High Clearance Forward Off-Set A-Arms for the Polaris RZR

Question

Q: Will these A arms retain the 50" width on a 570 RZR?

Asked by: Curtis - 4/23/2018

Submit an answer

Q: does this kit have new extended tie rod ends and steering stop kit?

Asked by: Craig - 2/17/2019

Submit an answer

Q: will these a arms fit on a 2015 polaris Ace 570 ?

Asked by: lawrence - 8/20/2020

Submit an answer

Q: Do you have on hand and available to ship, this item. I don't care what color it is, but it needs to fit a 2011 Polaris RZR 800?

Asked by: Chuck Buxton - 11/10/2020

Submit an answer

Q: Will my stock A arm garage bushings fit your foward A arms?

Asked by: Daniel - 3/13/2021

Submit an answer

Q: Hi. I have a 2012 Polaris rzr 800 with a 1-3 inch lift I would I be able to run 30x10-14 with out any issues? Thanks.

Asked by: Brandon - 10/19/2022

Submit an answer

Q: With a 2 inch lift and a forward a arm offset kit would 30-10-14 fit

Asked by: Brandon - 10/19/2022

Submit an answer

Q: Hello I have a 2011 polaris rzr 800 with a 3 inch lift I'm looking to get a set of high Clearance forward a arms I'm waiting to run a set of 29x9 14 or a set of 30x10 x14 will these be OK to run with what I'm looking to do

Asked by: Jacob Ridge - 9/5/2023

Submit an answer

Questions about this item? Ask here.

Accepted Answer

A: yes

Was this answer helpful? 1 of 1 Customer(s) found this Answer helpful.

Answer provided by: Spence (5/2/2018)

Accepted Answer

A: Yes they do

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Sales (2/25/2019)

Accepted Answer

A: No they will not.

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: General (8/20/2020)

Accepted Answer

Hi, yes we have these in stock in black. Unfortunately the ball joints are out of stock until December so I would not be able to supply those right now.

Accepted Answer

You can use factory bushings or aftermarket with these A-Arms.

Accepted Answer

A: If you have a 3 Inch lift yes you should be fine

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Amy (10/19/2022)

Accepted Answer

Yes you should be able to run 30's with both of those added to your machine!

Accepted Answer

A: Yes that will be ok!

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Cortland (9/6/2023)

Super ATV High Clearance Forward Off-Set A-Arms for the Polaris RZR

Choose Options

Rating Snapshot

Average Customer Ratings

Q: Will these A arms retain the 50" width on a 570 RZR?

Q: does this kit have new extended tie rod ends and steering stop kit?

Q: will these a arms fit on a 2015 polaris Ace 570 ?

Q: Do you have on hand and available to ship, this item. I don't care what color it is, but it needs to fit a 2011 Polaris RZR 800?

Q: Will my stock A arm garage bushings fit your foward A arms?

Q: Hi. I have a 2012 Polaris rzr 800 with a 1-3 inch lift I would I be able to run 30x10-14 with out any issues? Thanks.

Q: With a 2 inch lift and a forward a arm offset kit would 30-10-14 fit

Q: Hello I have a 2011 polaris rzr 800 with a 3 inch lift I'm looking to get a set of high Clearance forward a arms I'm waiting to run a set of 29x9 14 or a set of 30x10 x14 will these be OK to run with what I'm looking to do

Related Items

Browse Similar Items

Recently Viewed Items