Gen 3 Portal Gear Lift for Can-Am Defender
Get a Lift and Gear Reduction in one box with our 4 Inch Portal Gear Lift. This is the Gen 3 Portal design and its ready to rip on any type of terrain! Gain major clearance and run larger tires and still have the torque you need to turn them. The Lift and Gear reduction are in the hub which means they maintain suspension geometry and reduce drive-train stress. You can customize these a bit by choosing 15% or 30% gear reduction and selecting a cast or billet aluminum housing.
What is Dual Idler?
Super ATV has made this dual idler portals unlike any other. Adding a second idler gear in the portal box, allows the load to get spread over twice as much surface area for more reliable torque transfer and the strongest gear set you can get. Two idler gears don't do a thing if they're not paired perfectly. Precision CNC grinding ensures these do. Made from the industry's toughest 9310 steel alloy.
30% Gear Reduction
The 30% is perfect for Mud & Rocks. You will get clearance for huge tires and massive boost for torque. You will be able to turn monster tires like they're stock and take your UTV through the thickest mud holes and crawl over rocks and boulders like they're nothing! These portals are built for rock crawling and mud and will have grinning from ear to ear! These are built to perform!
15% Gear Reduction
The 15% is perfect for Work & Trails! Adding this 4 Inch Portal with the 15% gear reduction will give you clearance to get over brush, and clear ruts and ditches while towing trailers and such. This set up works perfect for trails less traveled as well. Creek crossings and hills won't know what hit them when you roll up!
These gears are precision ground and made with 9310 billet steel alloy for high strength and high speed. This means they're cool and quiet even when you're hammering down the throttle on the road, and they are built to withstand every ride!
You have the choice of Billet or Cast Aluminum housings to finish your portals. Our billet housings are CNC machined right in the USA! and give you increased strength and consistency over cast. Not to mention they look dang good!!
*14 Inch or larger wheel required
*14 Inch Wheels cannot exceed 4-1/2 inch backspacing
* Not compatible with dual bead-lock wheels
* Wheels need to have a center hole of at least 3.25 inch (82.55mm) or require a 1inch wheel spacer
- Our Super ATV Gen 3 4 inch Portal Gear Lift generally ships out within 1-2 business day!
- 15% or 30% Gear Reduction
- 9310 alloy billet steel precision ground gears are cool and quiet
- Available in billet or cast aluminum
- No Leak Bearings and Seals
- Universal Hub Fist all Major Bolt Patterns
- 1.5 inch diameter 4340 hardened steel drive shaft
- Designed for all terrains or riding styles
- Limited Lifetime Warranty
Kit 1 Fits:
Can-Am Defender HD 5 : 2017-2021
Can-Am Defender HD 5 DPS : 2017-2021
Can-Am Defender HD 8 : 2016-2021
Can-Am Defender HD 8 DPS : 2016-2021
Can-Am Defender HD 8 XT : 2016-2021
Can-Am Defender HD 10 : 2016-2019
Can-Am Defender HD 10 DPS : 2016-2021
Can-Am Defender HD 10 XT : 2016-2021
Can-Am Defender HD 10 XT Cab : 2016-2021
Can-Am Defender HD 10 XTP : 2018-2021
Can-Am Defender HD 10 Mossy Oak : 2018-2021
Can-Am Defender HD 10 PRO : 2020-2021
Can-Am Defender MAX HD 8 : 2017-2021
Can-Am Defender MAX HD 8 DPS : 2017-2021
Can-Am Defender MAX HD 8 XT : 2017-2021
Can-Am Defender MAX HD 10 : 2017-2021
Can-Am Defender MAX HD 10 DPS : 2017-2021
Can-Am Defender MAX HD 10 XT : 2017-2021
Can-Am Defender MAX HD 10 XT Cab : 2017
Kit 2 Fits :
Can-Am Defender HD 10 XMR : 2018+
Can-Am Defender HD 10 XT Cab : 2018+
Can-Am Defender Limited : 2020+
Can-Am Defender MAX HD 10 XT Cab : 2018+
Can-Am Defender MAX Lone Star Edition : 2018+
Can-Am Defender MAX HD 10 XMR : 2019+
Can-Am Defender MAX Limited : 2020+
Commander Portal Gear Suspension Recommendations
Required Suspension Setup with 4 inch Portals
3 Inch Lift Kit (15% Recommended)
6 inch Lift (30% Recommended)