These Altas Pro A-Arms are built to conquer sand, mud, and everything in between! They are built with 1.5 Inch diameter tubing improves the design vs. Super ATVs standard offset A-arms and measure in at 0.5 inches larger than stock. Plus you get that 1.5 inch forward offset for more stability and room for 38 inch tires giving your Pioneer 1000 a 'bad to the bone' look. Having that larger 1.5 inch diameter tubing gives you so much more strength and reliability. Half inch bigger than stock and a quarter inch bigger than standard offset arms these are designed to withstand some extreme torture! Finished with a UV-resistant powder coating to make them that much stronger and make them more corrosion resistant. Getting an A-Arm with the forward offset feature will give you more ground clearance but you also gain more stability. You can ride over stumps and rocks you'd take a hard pass on before. These arms will lengthen the wheelbase of your machine by moving the ball joint 1.5 inches forward. Again allowing you to run up to 31 inch tires without adding a lift! Extra ground clearance, larger tires, longer wheelbase.. what more could you as for! Another great feature about these A-Arms is the adjustable pivot blocks. This gives you the ability to change the camber. Keeping an eye on this when adding larger tires and lift kits is important so you can adjust to eliminate premature tire wear. Super ATV is next level.. they pre-adjust these to match your machine's stock specs. You can also add some pre-installed ball joints to make your life a little easier! If you don't select pre-installed you MUST re-use your stock ball joints! These High Clearance A-Arms are ready to hit the whoops or take on the most heart pounding trails and are durable and tough enough to do that and much more! Throw whatever you can at them, they come with a lifetime warranty offered by Super ATV so don't ride scared! Upgrade your Honda Pioneer 1000 with these Atlas Pro A-Arms Today!! - Our Super ATV A-Arms generally ship out within 1 business day! - Fits: Honda Pioneer 1000 : 2016+ Honda Pioneer 1000-5 : 2016+ Honda Pioneer 1000 Deluxe : 2016+ Honda Pioneer 1000-5 Deluxe : 2016+ Honda Pioneer 1000 Limited Edition : 2017+ Honda Pioneer 1000-5 Limited Edition : 2017+ Honda Pioneer 1000-6 : 2023+ - A-Arms are Backed up with a Lifetime Warranty by Super ATV - Adds 1.5 Inches of forward offset - Fit up to 31 Inch tires - Made with 1.5 diameter tubing - Adjustable lower pivot block for full camber adjustability - Utilizes stock A-arm bushings - UV-resistant powder coat finish - Easy to install - Manufacturer's Part Number : AA-H-PIO1K-OHC-02 & AA-H-PIO1K-OHC-38 Installation Instructions
Shopping Bag 0 item(s) 